The use of high-quality imported environmentally friendly raw materials, the free TD content is low, the smell is fresh and not pungent, safe and environmentally friendly. Net aldehyde technology breaks through a number of scientific and technological problems to apply net aldehyde technology to wood paint, which has a strong degradation effect on formaldehyde, the biggest indoor air pollution killer, and protects the health of the whole family.

Product features:

●High transparency

●Color mixing is available

●Yellowing resistance, good leveling

●Good fullness, light and color retention

●Clear film and good feel of top coat

Construction method:

This product can be brushed, rolled or airless sprayed.

Application:

It is suitable for interior decoration, furniture and various bamboo and wood products surface decoration and protection.

Method of use:

When mixing, mix the main paint well, then mix it with curing agent and diluent according to the proportion of construction, strain it through a 200 mesh filter and leave it for 15 minutes to dissolve fully before use.

Paint consumption:

Primer: 10-12mKg/single time (main agent)

Top coat: 12-14mKg/single time (main agent)

(The actual area varies according to the construction method, surface roughness and construction environment)

Drying time (temperature 25°/relative humidity 70%):

Surface drying 0.5 hours, actual drying 24 hours, wet weather or low temperature, should be extended appropriately.

Re-coating time:

6 hours Actual drying time and recoating time will vary depending on the temperature or relative humidity.

Construction method and process:

Brush or spray (need to adjust the diluent ratio appropriately), before use, please strictly according to the proportion of blending and stirring well after the paint please leave for about 15 minutes, after the disappearance of bubbles, it is recommended that the top coat with 200-300 mesh / primer with 80-100 mesh filter cloth filter after use; recommended construction order for three bottom two sides, can also be adjusted according to actual needs such as two bottom three sides, etc.; tuned paint is recommended to be used up within 4 hours The used tools should be cleaned with thinner immediately after use.

Precautions:

●The surface of the painted object must be dry, polished and clean, without stains, and keep the environment free from pollution; avoid construction at low temperature (≤5℃), high humidity (80%≥) and when the substrate is too wet (water content≥14%).

● Paint and curing agent can react with water and moisture, after opening, if not used up at once, it must be re-sealed when double care.

Please be sure to use our products together and follow the construction process strictly, otherwise the desired effect may not be achieved. We are not responsible for the quality problems caused by the substrate and the construction environment if the construction is not in accordance with the process requirements, or if the company's products are not used together.