This product is carefully selected with various high-quality pigments, fillers, and imported environmentally friendly additives, ensuring the environmental friendliness of the product from the raw materials, without any irritating odor; It is an ideal choice for creating a beautiful home environment.

　　characteristic:

　　Low VOC, environmentally friendly and healthy

　　Strong covering power, moisture-proof and alkali resistant

　　Clean and environmentally friendly, with a light odor

　　Good workability and high coating rate

　　The paint film is pure white and has a delicate touch

　　Smooth paint film, long-lasting and bright

　　Construction method:

　　This product can be applied by brush, roller, or airless spraying

　　Purpose:

　　Widely used for decoration and protection of indoor substrates such as concrete, cement mortar, brick walls, and ceilings.

　　Theoretical paint consumption:

　　10-12 square meters/liter/single pass (the actual coating area varies depending on the roughness and dryness of the substrate surface, construction methods, and dilution ratio, and the coating rate also varies).

　　Construction process:

　　● New wall: Apply two coats of putty (polishing and cleaning) → apply one coat of alkali resistant primer (polishing and cleaning) → apply two coats of topcoat;

　　Old wall: mold removal, polishing, cleaning → one coat of alkali resistant primer (polishing, cleaning) → two coats of topcoat.

　　Construction instructions:

　　After the new wall is completely dry, it is required to have a moisture content of less than 6% and a pH value of less than 10. Use our company's alkali resistant primer (which can be diluted and stirred with an appropriate amount of water) for appropriate primer treatment. Then apply two coats of topcoat (diluted and stirred with an appropriate amount of water), and the interval between repainting should not be less than 2 hours. Construction should not be carried out when the ambient temperature is below 5 ℃ or the relative humidity is greater than 85%.

　　When constructing old walls, it is necessary to ensure that the walls and putty have high strength (not loose), otherwise it may cause defects such as peeling, cracking, peeling, poor leveling, and poor water resistance.

　　Safety precautions:

　　Please carefully read the construction instructions in the product packaging and labels before use to obtain reliable and satisfactory coating results;

　　Try to open all doors and windows before starting operation and use to ensure sufficient ventilation conditions in the construction area;

　　If you have allergic skin, please always wear protective equipment during use; If accidentally contaminated with the eyes, please immediately rinse with plenty of water and seek medical assistance;

　　Please do not allow children or pets to enter the construction area, and store the product in a place that they cannot reach; If accidentally contaminated, immediately rinse with plenty of water and seek medical assistance;

　　To ensure the ideal coating effect, please effectively separate, cover, and shield the area between wooden products and walls, better maintain the cleanliness of the construction site, and avoid chaotic construction operations. Please follow the construction sequence of applying wooden paint first, drying before applying latex paint.