Adopt new odor purifying technology and purifying formaldehyde technology, rich in fresh negative ions, can achieve dry film 24 hours fast odorless, can effectively inhibit the surface of furniture bacteria, mold breeding, maintain a healthy and safe indoor environment, more effective adsorption and decomposition of free formaldehyde in the room, so that the family live a healthy and worry-free life.

Features:

●Dense and delicate paint film, smooth and comfortable to the touch

●Covers minor cracks and prevents cracking

●Wear-resistant, scratch-resistant

●Anti-impact and anti-aging

●Strong waterproof and anti-fouling

●Low VOC, clean odor, no sting

●Strong anti-mold and anti-bacterial

Construction method:

This product can be brushed, rolled or airless sprayed

Uses:

It is suitable for interior decoration, furniture and various bamboo and wood products surface decoration and protection.

Theoretical paint consumption (based on dry film 30μm):

12-14 square meters/liter/single time (main agent); primer: 10-12 square meters/liter/single time (main agent) (actual coating area varies depending on the roughness and dryness of the substrate surface, construction method and dilution ratio).

Construction process:

●New wall: two times of putty (sanding, cleaning) → one time of anti-alkali primer (sanding, cleaning) → two times of top coat:

●Old wall: remove mildew, sanding, cleaning → anti alkali primer once (sanding, cleaning) → top coat two times.

Construction instructions:

After the new wall is dried, the moisture content should be less than 6% and the PH value less than 10, then use our anti-alkali primer (add appropriate amount of water to dilute and stir) for proper primer treatment. Then use top coat (add appropriate amount of water to dilute and stir) to paint two times, and the interval of recoating should not be less than 2 hours. It is not suitable for construction when the ambient temperature is lower than 5℃ or the relative humidity is more than 85%.

When working on old walls, ensure that the wall surface and putty have high strength (not loose), otherwise it is easy to cause defects such as dehiscence, cracking, peeling, poor leveling and poor water resistance.

Drying time (at 25°C):

30 minutes for surface drying, 120 minutes for hard drying

Re-coating:

At least 2 hours interval, wet weather or temperature is too low, should be extended appropriately.

Cleaning:

After stopping in the middle of painting and after finishing painting, please clean all utensils with water in time.

Storage:

Store in a cool, dry and ventilated place, prevent from freezing (not less than 0℃), the remaining paint should be sealed and stored in time.

Safety matters:

●Please read the instructions in the package and label carefully before use to obtain reliable and satisfactory coating effect.

●Open all doors and windows as much as possible to ensure sufficient ventilation in the construction area before starting operation and use.

●If you have allergic skin, always wear protective gear during use; if you accidentally get eye contact, please flush with plenty of water immediately and seek medical help.

●Do not allow children or pets to enter the work area and store the product out of their reach; rinse immediately with plenty of water and seek medical attention if contaminated.

●To ensure the ideal painting effect, please effectively separate, cover and shield the area between wood and wall, to better maintain the cleanliness of the construction site and avoid confusing construction operations, please follow the construction sequence of wood paint first and then latex paint after drying.